RECHARGEABLE ROUND LIPO BATTERY

HIGH QUALITY WITH LOW PRICE

Our company Liter energy battery is engaged in lipo battery research and now we can produce round lipo batteries. The diameter is 30mm to 50mm and the thinnest can reach 2.5mm. Choose the best round lipo batteries in Liter energy battery.

DIAMETER RANGE FROM 30 MM TO 50 MM

Our round lipo batteries range in diameter from 30 mm to 50 mm, with high quality and reliability. We also provide customized services to customize lipo batteries according to your size and capacity. In addition to our full range of lipo batteries, we also offer the most comprehensive customer-specific assembly solutions.

STRUCTURE AND DIMENSION

HANDLING PRECAUTIONS AND GUIDLINE

1. Charging

1.1 Charging current:

Charging current should be less than the maximum charge current specified in the Product Specification. Charging with higher current than recommended value may cause damage to cell electrical, mechanical, and safety performance and could lead to heat generation or leakage.

1.2 Charging voltage:

Charging shall be done by voltage less than that specified in the Product Specification (4.2V/cell). Charging beyond 4.25V, which is the absolute maximum voltage, must be strictly prohibited. The charger shall be designed to comply with this condition. It is very dangerous that charging with a higher voltage than maximum voltage may cause damage to the cell electrical, mechanical safety performance and could lead to heat generation or leakage.

1.3 Charging temperature:

The cell shall be charged within a 10°C~45°C range in the Product Specification.

2. Discharging

2.1 Discharging current:

The cell shall be discharged at less than the maximum discharge current specified in the Product Specification. High discharging current may reduce the discharging capacity significantly or cause over-heat.

2.2 Discharging temperature:

The cell shall be discharged within –20°C~60°C range specified in the Product Specification.

2.3Over-discharging:

It should be noted that the cell would be at an over-discharged state by its self-discharge characteristics in case the cell is not used for a long time. In order to prevent over-discharging, the cell shall be charged periodically to maintain between 3.6V and 3.9V. Over-discharging may cause loss of cell performance, characteristics, or battery functions. The charger shall be equipped with a device to prevent further discharging exceeding a cut-off voyage specified in the Product Specification. Also, the charger shall be equipped with a device to control the recharging procedures as follows: The cell battery pack shall start with a low current (0.01C) for 15-30 minutes, I .e.-charging, before rapid charging starts. The rapid charging shall be started after the (individual) cell voltage has been reached above 3V within 15-30 minutes that can be determined with the use of an appropriate timer for pre-charging. In case the (individual) cell voltage does not rise to 3V within the pre-charging time, then the charger shall have functions to stop further charging and display the cell/pack is at an abnormal state.

STORAGE AND OTHERS

1. Ambient temperature:

23°C±5°C

2. Relative Humidity:

65±20%

3. Please activate the battery once every 3 months according to the following method:

Charge at 0.2C to 4.2V, rest 5 min, then discharge with 0.2C to 3.0V/cell, rest 5 min, then charge at 0.2C to 3.9V.

RECHARGEABLE ROUND LIPO BATTERY LIST